Assembly timing test
| Oct 2024
How long does the assembly take? In this test, we already have the carbor support plate with all holes drilled, and trays mounted, as well as the threaded rods. 13:25 - Start with the detector as show, with ribbons attached. | 
| ||||||||||
| 14:07 - Cables removed. There were 3 M2 philipshead screws where the head was almost stripped, took extra time to get them out | 
| ||||||||||
| 14:15 - top removed and cable top brackets off | 
| ||||||||||
| 14:23 - blocks 2, 4, 6 (connectors D,E,F) removed | 
| ||||||||||
| 14:34 - blocks 1, 3, 5 (connectors A,B,C) removed | 
| ||||||||||
| Components laid out, ready for re-assembly | 
| ||||||||||
| 14:32: start reassembly, block 1 (connector A) threaded and inserted | 
15:00 - first block 1 finished
| 15:18 - third block 1 finished |
15:23 - start threading blocks 3 (connectors B)
| 15:56 - 3rd block 3 finished |
15:56 - start placing blocks 5
| 16:07 - blocks 5 (connectors C) finished |
16:32 - start blocks 6 (connectors D) finishedcks 2
| 16:49 - blocks 4 17:03 - blocks 2 17:17 - finished blocks 2 |
17:21 - cover back on
| Total re-assembly time: 2h 50m |
|
back