|
FVTX Integration
Walt Sondheim is our Mechanical Project Engineer
Eric Mannel is our Electrical Project Engineer
Robert Pak is in charge of Integration Mechanics
Misc:
- Lessons Learned
- Radiation damage issues (March 2012)
- Test fit of an empty cage into the VTX (July 2011)
- Enclosure Inner spool piece,
- Enclosure endcap area,
- Enclosure end plate
- Bending VTX cables
- Survey issues
- 2010 West half installation in 1008
- Internal bias cables
- Labeling and numbering
- FVTX_Trunk_Fibers.xls: Patch panel assignment for slow control and clock fibers.
- Data Fiber locations: Each data fiber cable bundel consists of 6 multi-fiber data cables with MPT connectors on each end. After the cable bundles are pulled, each data cable will be labled according to the FVTX convention, XY-N where XY is the geographical quadrant and ROC numbers, N is fiber connector number (0-3).
- VTX-FVTX_TC_Cabling-8-Nov-2011.xls
- Disk and Cage Assembly pptx (22 Nov '10),
html (22 Nov '10)
- Cabling disks, and cage assembly steps
- Procedure for installation of West half in the IR
- How the VTX was surveyed
- Installed in 1008
- FIxing fiber connectors
- Cold bias current change with received radiation
- FVTX Bias database access
- pictures of the silicon mounted to the nose cone (thanks to J. LaBounty)
Last update Wednesday, 18-Jun-2025 16:38:15 MDT by Melynda Brooks